搜索产品搜索文章
— 在您的工业网络中部署安全而灵活的可扩展交换解决方案。 —
这些交换机还坚固耐用、易于管理、具有弹性，并通过行业协议支持得到增强。
Cisco 工业以太网 2000 系列交换机是固定平台，可通过成熟的 Cisco IOS 软件提供第 2 层交换。凭借其广泛的认证以及广泛的电源电压输入和工作温度，这些开关几乎适用于所有工业应用。工业以太网 (IE) 2000 系列交换机将企业网络中流行的经过验证的 Cisco Catalyst 技术扩展到工业网络。卓越的安全、视频和语音服务因此扩展到工业应用。这些交换机还坚固耐用、易于管理、具有弹性，并通过行业协议支持得到增强。
产品概述
Cisco ®工业以太网 2000 (IE 2000) 系列是一系列紧凑、坚固的接入交换机，可处理工业网络中的安全、语音和视频流量。他们使用思科弹性以太网协议 (REP) 为汽车、石油和天然气、采矿、运输和能源等行业的客户提供高度安全的访问和行业领先的融合。
产品详情
Cisco IE 2000 系列专为低成本、少端口和小尺寸而设计。他们提供：
● 四个、八个或 16 个 10/100Base-T 以太网端口（选定型号上有小型可插拔 [SFP] 下行链路）；具有紧凑外形的固定配置
● 两个千兆位组合端口：SFP（100 Mbps 和 1 Gbps）或 RJ45 上行链路
● 双输入直流电源，报警继电器，DIN导轨安装
● 工业以太网供电（PoE）解决方案
● 提供保形涂层 SKU（IE-2000-16TC-GX 和 IE-2000-16PTC-G-NX）
● 可插拔SD闪存卡和迷你USB连接器
● 工业环境合规性和认证
● 工业合作伙伴应用：Ethernet/IP 和 PROFINET
主要优点和特点
● 轻松部署：使用动态主机控制协议(DHCP) 进行零接触发现、自动同步到SD 卡、快速设置和快速启动时间（60 秒），有助于毫无阻力地迁移到以太网环境。
● 安全性： 802.1x、端口安全和DHCP 允许基于端口的动态认证；安全外壳 (SSHv2)；SNMPv3 在 Telnet 和 SNMP 会话期间提供加密的管理员流量；TACACS+和RADIUS身份验证有助于集中控制并限制未经授权的用户。
● 弹性： Cisco REP 环网协议和 PROFINET – 介质冗余协议 (MRP)
● 可管理性： Cisco DNA Center 软件、自动智能端口、Web 设备管理器、Telnet、HTTPS 访问、SNMP、CNA 和 Cisco Prime 基础设施。
● 网络地址转换(NAT)：线速、硬件支持的1:1 静态地址转换，旨在实现第2 层机器节点网络中的重复IP 地址使用。
● 三层路由： IPv4 和IPv6。
● 工业PoE：选定型号支持PoE (IEEE 802.af) 和PoE+ (802.3at)。
● 工业自动化协议： EtherNet/IP (CIP) 和PROFINET MRP (IEC 62439-2) 允许与Rockwell、Siemens 等公司的现有管理平台集成。
交换机性能和可扩展性
● 最大转发带宽3.8Gbps
● 最大交换带宽7.6Gbps
● 最大转发速率：64 字节数据包 5.66Mpps（所有数据包大小的线速）
● 出口缓冲区：2 MB
● 单播MAC地址：8000个
● 互联网组管理协议 (IGMP) 多播组：255 个
● 最大虚拟 LAN (VLAN)：1005
● IPv4 MAC 安全 ACE：384（默认三态内容可寻址内存 [TCAM] 模板）
● 双向、128 个 NAT 转换条目
● IPv4路由：3500条路由，IPv6路由：1750条路由
详细的产品信息
交换机型号如图1所示，Cisco IE 2000系列配置信息如表1所示。表 2 列出了电源和许可证升级的 SKU。表 3 包括 IE 2000 系列产品规格。表 4 列出了 IE 2000 系列电源表 5列出了软件功能 表 6 详细介绍了可供订购的 Cisco DNA Essentials PID。表 7 包括合规性规范。表 8 概述了管理和相关行业标准。
图1。 思科工业以太网 2000 系列交换机
如果没有找到满意的资料，可以在交小圈发布请求贴，让更多网友来帮你想办法，或者找找以前有没有类似资源 (https://q.jhj.cn)
Table 1. Industrial Ethernet 2000 Series configurations
| Product number | Total ports | RJ45 Copper ports | Combo ports (SFP or RJ45) | SFP ports | Software license | Type of possible upgrade | IEEE1588 | L2NAT | PoE/PoE(+) | Conformal coating |
| IE-2000-4TS-L | 6 | 4 FE | 2 FE | LAN Lite | 3 | |||||
| IE-2000-4TS-B | 6 | 4 FE | 2 FE | LAN Base | 1 | |||||
| IE-2000-4T-L | 6 | 6 FE | LAN Lite | 3 | ||||||
| IE-2000-4T-B | 6 | 6 FE | LAN Base | 1 | ||||||
| IE-2000-4TS-G-L | 6 | 4 FE | 2 GE | LAN Lite | 3 | |||||
| IE-2000-4TS-G-B | 6 | 4 FE | 2 GE | LAN Base | 1 | |||||
| IE-2000-4T-G-L | 6 | 4 FE, 2 GE | LAN Lite | 3 | ||||||
| IE-2000-4T-G-B | 6 | 4 FE, 2 GE | LAN Base | 1 | ||||||
| IE-2000-4S-TS-G-L | 6 | 4 FE, 2 GE | LAN Lite | 3 | ||||||
| IE-2000-4S-TS-G-B | 6 | 4 FE, 2 GE | LAN Base | 1, 3 | ||||||
| IE-2000-8TC-L | 10 | 8 FE | 2 FE | LAN Lite | 3 | |||||
| IE-2000-8TC-B | 10 | 8 FE | 2 FE | LAN Base | 1 | |||||
| IE-2000-8TC-G-L | 10 | 8 FE | 2 GE | LAN Lite | 3 | |||||
| IE-2000-8TC-G-B | 10 | 8 FE | 2 GE | LAN Base | 1 | |||||
| IE-2000-8TC-G-E | 10 | 8 FE | 2 GE | LAN Base | 1, 2, 4 | Yes | U* | |||
| IE-2000-16TC-L | 20 | 16 FE | 2 FE | 2 FE | LAN Lite | 3 | ||||
| IE-2000-16TC-B | 20 | 16 FE | 2 FE | 2 FE | LAN Base | 1 | ||||
| IE-2000-16TC-G-L | 20 | 16 FE | 2 GE | 2 FE | LAN Lite | 3 | ||||
| IE-2000-16TC-G-E | 20 | 16 FE | 2 GE | 2 FE | LAN Base | 1, 2, 4 | Yes | U* | ||
| IE-2000-16TC-G-X | 20 | 16 FE | 2 GE | 2 FE | LAN Base | 1, 2, 4 | Yes | U* | Yes | |
| IE-2000-8TC-G-N | 10 | 8 FE | 2 GE | Enhanced LAN Base | 1, 2 | Yes | Yes | |||
| IE-2000-16TC-G-N | 20 | 16 FE | 2 GE | 2FE | Enhanced LAN Base | 1, 2 | Yes | Yes | ||
| IE-2000-16PTC-G-L | 18 | 16 FE | 2 GE | LAN Lite | 3 | Yes | ||||
| IE-2000-16PTC-G-E | 18 | 16 FE | 2 GE | LAN Base | 1, 2 | Yes | U | Yes | ||
| IE-2000-16PTC-G-NX | 18 | 16 FE | 2 GE | Enhanced LAN Base | 1, 2 | Yes | Yes | Yes | Yes |
“Type of possible upgrade” legend:
1: LAN Base to IP Lite Cisco IOS Software Upgrade
2: Enhanced LAN Base to IP Lite Cisco IOS Software Upgrade
3: LAN Lite to LAN Base Cisco IOS Software Upgrade
4: LAN Base to Enhanced LAN Base Cisco IOS Software Upgrade and License Upgrade
U: Upgradable to L2NAT via Enhanced Lan Base or IP Lite license
Table 3. Product specifications
| Description | Specification |
| Hardware | ● 256 MB DRAM with ECC memory● IEEE 1588v2 FPGA● 64 MB on-board flash memory● 1GB removable SD flash memory card (optional)● Mini-USB connector |
| Alarm | ● Alarm I/O: Two alarm inputs to detect dry contact open or close; one alarm output relay |
| Power consumption | ● 4-port downlink models: 9.5-15 W● 8-port downlink models: 12.5-20 W● 16-port downlink models: 21-30 W● 4-port PoE/PoE+ models: 21-30 W (16-port base switch) and 4 PoE/PoE+ power requirement |
| Connectors and cabling | ● 100BASE-FX MMF (2 km), -LX SMF (10 km) -ZX SMF (100 km), BX10 SMF (10 km) SFP and CWDM SFP- based ports: LC fiber connectors● 10/100/1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling |
| Dimensions (H x W x D) including DIN rail | ● IE-2000 6 ports (copper downlinks) chassis: 5.1”H x 2.95”W x 4.51”D in (130mm H x 74.9mm W x 115mm D)● IE-2000 6 ports (SFP downlinks) chassis: 5.1“H x 3.15”W x 4.51”D in (130mm H x 80mm W x 115mm D)● IE-2000 10 ports short chassis: 5.1″H x 3.6″W x 4.51″D (130mm H x 91.4mm W x 115mm D)● IE-2000 10 ports long chassis: 5.1″H x 3.6″W x 5.26″D (130mm H x 91.4mm W x 134mm D)● IE-2000 18-20 ports chassis: 5.1″H x 5.0″W x 5.26″D (130mm H x 127mm W x 134mm D) |
| Weight | ● IE-2000 6 ports chassis: 2.45 lb (1.11 kg)● IE-2000 6 ports (SFP): 2.69 lb (1.22 kg)● IE-2000 10 ports short chassis: 2.75 lb (1.25 kg)● IE-2000 10 ports long chassis: 3.45 lb (1.56 kg)● IE-2000 18-20 ports chassis: 4.35 lb (1.97 kg) |
Table 4. IE 2000 Series power supplies
| Product number | Wattage | Rated nominal input operating range | PoE/PoE+ support1 | More details |
| PWR-IE50W-AC= | 50W | AC 100-240V/1.25A 50-60Hz or DC 125-250V/1.25A | No | Click here for more details on these DIN Rail power supplies3 |
| PWR-IE50W-AC-L=2 | 50W | AC 100-240V/1.2A 50-60Hz | No | |
| PWR-IE65W-PC-AC= | 65W | AC 100-240V/1.4A 50-60Hz or DC 125-250V/1.0A | Yes | |
| PWR-IE65W-PC-DC= | 65W | DC 24-48VDC/4.5A | Yes | |
| PWR-IE170W-PC- AC= | 170W | AC 100-240V/2.3A 50-60Hz or DC 125-250V/2.1A | Yes | |
| PWR-IE170W-PC- DC= | 170W | DC 12-54VDC/2.3A | Yes | |
| PWR-IE240W-PCAC-L=2 | 240W | AC 100-240V/3.5A 50-60Hz | Yes | |
| PWR-IE480W-PCAC-L=2 | 480W | AC 100-240V/6.0A 50-60Hz | Yes |
1 The entire power budget for the switch and PoE ports needs to stay within the power supply.
2 The power supplies are not certified for smart grid and hazardous locations. These power supplies are IP20 rated.
3 Power Supplies Datasheet Link: https://www.cisco.com/c/en/us/products/collateral/switches/industrial-ethernet-switches/datasheet-c78-742180.html
Table 5. Cisco IE 2000 software features
| LAN Lite license | Baseline features |
| Layer 2 switching | IEEE 802.1, 802.3, 802.3at, 802.3af standard (see Table 8), VTPv2, NTP, UDLD, CDP, LLDP, Unicast MAC filter, Resilient Ethernet Protocol (REP), Media Redundancy Protocol (MRP) Ring (IEC 62439-2) |
| Security | SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, SPAN session |
| Multicast | IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier |
| Management | Fast Boot, Express Setup, Web Device Manager, CNA, Cisco Prime, LMS, MIB, SmartPort, SNMP, syslog |
| Industrial Ethernet | EtherNet/IP, Profinet v2 |
| LAN Base license | Additional features |
| Layer 2 switching | VTPv3, EtherChannel, Voice VLAN, Flexlink |
| Security | IPv4 Port-Security, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN. MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Access-List (ACL) |
| Quality of service | IPv4 Ingress Policing, Rate-Limit, Egress Queuing/Shaping, AutoQoS, PROFINET QoS |
| Management | Port-Based DHCP, Storm Control – Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Customized TCAM/SDM Size Configuration, Embedded Event Manager (EEM) |
| Industrial Ethernet | IEEE 1588 PTPv2 |
| IPv4 routing | IPv4 static routing |
| IPv6 routing | IPv6 host support, HTTP over IPv6, SNMP over IPv6 |
| Utility | MODBUS TCP/IP |
| Enhanced LAN Base | Additional features |
| Industrial management | Layer 2 switching with 1:1 static Network Address Translation (NAT) |
| IP Lite license | Additional features |
| IPv4 routing | RIP, OSPF, EIGRP, VRF Lite, PIM for L3 multicast routing including sparse (SM) and dense (DM) mode. |
| IPv6 Routing | IPv6 Static routing, OSPFv3 |
| Security | FIPS 140-2 |
Table 6. Cisco IE 2000 Cisco DNA Essentials license features
| Feature | Description |
| Elementry Management | Discovery, topology, inventory, software image management |
| Assurance | Health Dashboards – Network, Client, Basic Switch and Wired Client Health Monitoring, Compliance, Custom Reports, Device 360 and Wired Client 360 |
| Automation | Cisco Network Plug-and-Play application |
Table 7. Compliance specifications
| Description | Specification |
| Safety certifications | ● UL/CSA 60950-1● EN 60950-1● CB to IEC 60950-1 (with country deviations)● NOM to NOM-019-SCF1 (through partners and distributors)● CE Marking |
| Hazard location | ● ANSI/ISA 12.12.01 (Class1, Div2 A-D) *● EN 60079-0, -15 ATEX Certificate (Class 1, Zone2 A-D) ** Cabinet enclosure required |
| EMC emissions and immunity compliance | ● FCC 47 CFR Part 15 Class A● EN 55022A Class A● VCCI Class A● RoHS compliance● AS/NZS CISPR 22 Class A, AS/NZS CISPR 24● CISPR11 Class A, CISPR22 Class A● ICES 003 Class A● KCC -Korea● CE Marking● C-Tick (Australia)● Russia certification● Brazil certification● IEC/EN/EN61000-4-2 (Electro Static Discharge), 15kV air/8kV contact● IEC/EN 61000-4-3 (Radiated Immunity, 10 and 20 V/m)● IEC/EN 61000-4-4 (Fast Transients – 4kV power line, 4kV data line)● IEC/EN 61000-4-5 (Surge 2 kV/1 kV)● IEC/EN 61000-4-6 (Conducted Immunity, 10 V/emf)● IEC/EN 61000-4-8 (Power Frequency Magnetic Field Immunity)● IEC/EN 61000-4-9 (Pulse Magnetic Field Immunity)● IEC/EN 61000-4-10 (Oscillatory Magnetic Field Immunity)● IEC/EN 61000-4-11 (AC power Voltage Immunity)● IEC/EN 61000-4-29 (Voltage Dips Immunity)● IEC/EN 61000-6-1 (Immunity for Light Industrial Environments)● IEC/EN 61000-6-2 (Immunity for Industrial Environments)● IEC/EN 61000-6-4 Class A● EN 61326 |
| Shock and vibration | ● IEC 60068-2-27 (Operational Shock: 30G 11ms, half sine)● IEC 60068-2-27 (Non-Operational Shock 55-70G, trapezoidal)● IEC 60068-2-6, IEC 60068-2-64, EN 61373 (Operational Vibration)● IEC 60068-2-6, IEC 60068-2-64, EN 61373 (Non-operational Vibration) |
| Industry standards | ● UL508● CSA C22.2 No. 142● EN 61131-2 (EMC/EMI, environmental, mechanical)● Protective coating (specific models only)● Marine DnV● Substation KEMA (IEEE 1613, IEC 61850-3)● Railway EN 50155 (EMI/EMC, environmental, mechanical)● EN50121-3-2● EN50121-4● NEMA TS-2 (EMC, environmental, mechanical)● ABB Industrial IT certification● IP30● ODVA Industrial Ethernet/IP support● PROFINETv2.3 support |
| Corrosive testing | ● ISO-12944-6● IEC-60068-2-60 |
| Humidity | ● IEC 60068-2-52 (salt fog mist, test Kb) marine environments● IEC 60068 -2-3● IEC 60068-2-30● Relative humidity: 5% to 95% non-condensing |
| Operating temperature | ● -40C to +70C (vented enclosure – 40 LFM Air Flow)● -40C to +60C (sealed enclosure – 0 LFM Air Flow)● -34C to +75C (fan or blower-equipped enclosure – 200 LFM Air Flow)● -40C to +85C (IEC 60068-2-2 Environmental Type Testing – 16 hours)● Operational altitude: Up to 15,000 ft |
| Storage temperature | ● -40 C to +85 C (storage temperature)● IEC 60068-2-14● Storage altitude: Up to 15,000 ft |
| Mean Time Between Failures (MTBF) | ● Mean time between failure: 374,052 hours (42.7 years) |
| Warranty | ● Five-year limited warranty on all IE-2000 HW PIDs and all IE Power Supplies defined in table 4 above. See link below for details on warranty |
欢迎访问交换机商城，如有疑问，可随时致电139-1073-6192
| 交换机商城 | 交换机 |交换机官网 | www.JiaoHuanJi.cn
