搜索产品搜索文章
— 在工业网络边缘拥有更多企业网络功能,并实现性能、可扩展性、可视性和安全性的全面提升 —
产品概述
Cisco®工业以太网 (IE) 4010 系列交换机具有28个千兆位以太网接口,是高性能加固型第 2/3 层交换机,具有高密度以太网供电 (PoE) 功能,使其成为在以下领域用作接入交换机的理想选择:工业环境。IE 4010 提供全面的 Cisco IOS ®软件安全功能和高可用性环协议。该交换机非常适合室外机柜或恶劣环境,同时符合整体 IT 网络设计、合规性和性能要求。
IE 4010 拥有全面的软件功能集,由制造、公用事业和企业交换产品开发而成,非常适合扩展温度范围的位置,例如智能建筑、公用事业、过程控制、智能交通系统 (ITS) 和城市监控项目。IE 4010 具有内置的软件映像验证功能,可确保思科软件的真实性。IE 4010 补充了现有的 Cisco IE 2000、IE 2000U、IE 3200、IE 3300、IE 3400、IE 4000 和 IE 5000 系列交换机系列。
IE 4010 系列还可用于通过软件定义的物联网 (IoT) 访问扩展,轻松、安全地将企业网络扩展到恶劣环境,从而使用强大的功能在室外区域、仓库、配送中心、道路等实现连接。企业级基于意图的网络管理平台,例如 Cisco DNA ™ Center。
IE 4010 支持基于 GUI 的 Web 用户界面,交换机的快速设置提供简单的开箱即用配置,可通过工业网络提供高级安全、数据、视频和语音服务。
特点和优点
表 1 列出了 Cisco IE 4010 系列交换机的功能和优势。
表 1. Cisco IE 4010 系列交换机的特性和优势
特征 | 益处 |
稳健的工业设计 | ● 具有 PoE 功能的公用事业级、完全托管的 1 RU 机架安装以太网接入交换机。● 无风扇、对流冷却,无移动部件。● 扩展的工作温度范围(-40 至 75C)。● 经过硬化处理,可抵抗振动、冲击、浪涌和电噪声。● 符合工业自动化、ITS 和变电站环境的多行业规范。● 提高工业系统和设备的正常运行时间、性能和安全性。● IEEE 1588v2 精确时间协议(PTP – 支持公用事业的电源配置文件和制造的默认配置文件)。● 报警I/O,用于监控并向外部设备发送信号。 |
用户友好的 GUI 设备管理器 | ● 允许通过网络浏览器轻松配置和监控。● 无需终端仿真程序。● 多语言支持 – 英语、中文(繁体)、中文(简体)、法语、德语、日语、西班牙语(拉丁美洲) |
交换驱动器:“零配置”更换 | ● 真正的零配置替换,可轻松实现半夜或突然的故障恢复。● 发生故障时可以简单地更换开关。● 无需网络专业知识。● 有助于确保快速恢复。 |
高密度工业以太网供电 (PoE/PoE+) | ● 总共支持多达 24 个 PoE/PoE+ 端口,使用两个电源时功率预算高达 385W。● 支持即用型PoE 设备,例如高清(HD) IP 摄像机、无线接入点和IP 电话。 |
完整的千兆以太网交换机 | ● 总共28 个千兆以太网端口提供多种弹性设计选项。● 连接新的无线接入点● 支持新型高清IP 摄像机和面向未来的千兆位速度自动化设备。● 允许基于IP 的监控和数据采集(SCADA) 连接。● 支持对延迟非常敏感的应用和时间敏感的网络。● 下发多环;用于新网络配置的冗余环形拓扑。● 扩展需要更长距离连接的地理可扩展性。 |
思科工业以太网 (IE) 4010 系列交换机提供:
● 带宽和容量可根据您的网络需求而增长:高性能无阻塞交换容量,每台交换机具有 28 个千兆位以太网端口
● 高密度以太网供电 – 24 个 PoE 端口或 12 个 PoE+ 端口,可连接 IP 摄像机、IP 电话、徽章阅读器、无线接入点等。
● Cisco IOS 软件功能可实现轻松的 IT 集成和管理一致性
● Cisco DNA Center 管理和支持物联网软件定义的访问扩展
双环 设计通过 4 个千兆以太网上行链路端口、弹性以太网协议 (REP)、并行冗余协议 (PRP)、PROFINET – 介质冗余协议 (MRP) 环、高可用性无缝冗余 (HSR) 环、EtherChannel 和Flexlink 支持、集成冗余电源、垂死喘息等。
● 真正的零接触更换,解决半夜或突然发生的故障
● 具有先进硬件辅助功能(如NAT、IEEE1588)的线速、低延迟转发
● 使用通用映像简化软件升级路径
● 支持工业自动化协议 EtherNet/IP (CIP) 和 Profinet
Cisco ONE 软件提供了一种简化的消费模型,以工业自动化和扩展企业环境中的常见客户场景为中心。Cisco ONE 软件和服务为客户提供四大优势:
● 以极具吸引力的价格满足典型客户使用场景的软件套件
● 通过软件服务支持的许可证可移植性来保护其软件购买的投资
● 通过思科软件支持服务 (SWSS) 获取持续创新和新技术
● 灵活的许可模式,可随着时间的推移平稳分配客户的软件支出
图 1 显示交换机型号,表 2 显示所有可用的 4010 型号,表 3 列出电源,表 4 显示 Cisco IE 4010 系列交换机 PoE/PoE+ 的可用功率预算
图1。 思科 IE 4010 系列型号
如果没有找到满意的资料,可以在交小圈发布请求贴,让更多网友来帮你想办法,或者找找以前有没有类似资源 (https://q.jhj.cn)
Features and benefits of Cisco IE 4010 Series Switches
Feature | Benefit |
Robust industrial design | ● A utility grade, fully managed 1 RU rack mount Ethernet access switch with PoE capabilities.● Fanless, convection cooled with no moving parts.● Extended operational temperature range (-40 to 75C).● Hardened for vibration, shock, surge, and electrical noise immunity.● Complies with multi-industry specifications for industrial automation, ITS, and electrical substation environments.● Improves uptime, performance, and safety of industrial systems and equipment.● IEEE 1588v2 Precision Time Protocol (PTP – both power profile for utility and default profile for manufacturing are supported).● Alarm I/O for monitoring and signaling to external equipment. |
User-friendly GUI device manager | ● Allows easily configuration and monitoring via a web browser.● Eliminates the need for terminal emulation programs.● Multiple Language Support – English, Chinese (Traditional), Chinese (Simplified), French, German, Japanese, Spanish (LATAM) |
Swap drive: “zero-config” replacement | ● True zero-configuration replacement for easy middle-of-the-night or middle-of-nowhere failure recovery.● Simple switch replacement in case of a failure.● No networking expertise required.● Helps ensure fast recovery. |
High-density industrial Power over Ethernet (PoE/PoE+) | ● Supports up to 24 total PoE/PoE+ ports with power budget up to 385W available with two power supplies.● Enables ready-to-use PoE devices, such as High Definition (HD) IP cameras, wireless access points, and IP phones. |
Complete Gigabit Ethernet switch | ● Total of 28 Gigabit Ethernet ports provide multiple resilient design options.● Connects new wireless access points● Enables new HD IP cameras and future proof Gigabit speed automation devices.● Allows IP-based Supervisory Control And Data Acquisition (SCADA) connectivity.● Supports very-delay-sensitive applications and time-sensitive networks.● Delivers multiple rings; redundant ring topology for new network configurations.● Extends geographical scalability where longer distance connectivity is required. |
Features and benefits of Cisco IE 4010 Series Switches
Feature | Benefit |
Robust industrial design | ● A utility grade, fully managed 1 RU rack mount Ethernet access switch with PoE capabilities.● Fanless, convection cooled with no moving parts.● Extended operational temperature range (-40 to 75C).● Hardened for vibration, shock, surge, and electrical noise immunity.● Complies with multi-industry specifications for industrial automation, ITS, and electrical substation environments.● Improves uptime, performance, and safety of industrial systems and equipment.● IEEE 1588v2 Precision Time Protocol (PTP – both power profile for utility and default profile for manufacturing are supported).● Alarm I/O for monitoring and signaling to external equipment. |
User-friendly GUI device manager | ● Allows easily configuration and monitoring via a web browser.● Eliminates the need for terminal emulation programs.● Multiple Language Support – English, Chinese (Traditional), Chinese (Simplified), French, German, Japanese, Spanish (LATAM) |
Swap drive: “zero-config” replacement | ● True zero-configuration replacement for easy middle-of-the-night or middle-of-nowhere failure recovery.● Simple switch replacement in case of a failure.● No networking expertise required.● Helps ensure fast recovery. |
High-density industrial Power over Ethernet (PoE/PoE+) | ● Supports up to 24 total PoE/PoE+ ports with power budget up to 385W available with two power supplies.● Enables ready-to-use PoE devices, such as High Definition (HD) IP cameras, wireless access points, and IP phones. |
Complete Gigabit Ethernet switch | ● Total of 28 Gigabit Ethernet ports provide multiple resilient design options.● Connects new wireless access points● Enables new HD IP cameras and future proof Gigabit speed automation devices.● Allows IP-based Supervisory Control And Data Acquisition (SCADA) connectivity.● Supports very-delay-sensitive applications and time-sensitive networks.● Delivers multiple rings; redundant ring topology for new network configurations.● Extends geographical scalability where longer distance connectivity is required. |
Cisco IE 4010 Series switch models
Product number | Total ports | SFP Uplinks | SFP fiber ports (S) | Copper PoE/PoE+ Ports2(P) | Default software |
IE-4010-16S12P | 28 | 4 FE/GE | 12 FE/GE | 12 FE/GE | LAN Base1 |
IE-4010-4S24P | 28 | 4 FE/GE | 24 FE/GE | LAN Base1 |
1 Can be upgraded to IP Services license with the license product number in Table 15
2 All copper Gigabit Ethernet interfaces support speed negotiation to 10/100/1000 Mbps and duplex negotiation
Table 3. Power supplies for Cisco IE 4010 Series Switches
Product number | Wattage | Rated nominal input operating range | Supported input voltage operating range | PoE/PoE+ support | Use case scenario |
PWR-RGD-AC-DC-H | 150W | AC 100-240V/2.0A 50-60HzorDC 100-250V/2.0A | AC 85-264VorDC 88-300V | Yes | High voltage AC or DC power source, for hazardous locationsPoE power application |
PWR-RGD-LOW-DC-H | 150W | DC 24-60V/10A | DC 18-75V | Yes | Low voltage DC power source, for hazardous locationsPoE power application |
PWR-RGD-AC-DC-250 | 250W | AC 100-240V 3.3A 50-60HzorDC 100-250V 3.3A | AC 85-264VorDC 88-300V | Yes | High voltage AC or DC power source, for hazardous locationsPoE power application |
Table 4. Available power budget for PoE/PoE+ with different power supply wattage
Product number | 150W | 150W (dual) | 250W | 250W + 150W | 250W (dual) |
IE-4010-16S12P | 80 | 200 | 180 | 285 | 360 |
IE-4010-4S24P | 80 | 200 | 180 | 285 | 385 |
Product specifications
Description | Specification |
Hardware | ● 1 GB DRAM● 128 MB onboard flash memory● 1-GB removable SD flash memory card (Included)● Mini-USB and traditional RJ-45 console connector |
Alarm | Alarm I/O: four alarm inputs to detect dry contact open or closed, one Form C alarm output relay |
Accessories | ● SD-IE-1GB= – Spare SD card● L-IE4000-RTU= – Electronic RTU IP services software license for 4010 switches● 21–in. and 23–in. ETSI rack mount brackets |
Description | IE-4010-4S24P | IE-4010-16S12P | |
Dimensions, (H x W x D) | ● 1.75 x 17.5 x 14.0 in. (4.45 x 44.5 x 35.6 cm) with PWR-RGD-AC-DC-H / PWR-RGD-LOW-DC-H● 1.75 x 17.5 x 15.18 in. (4.45 x 44.5 x 38.56 cm) with PWR-RGD-AC-DC-250 | ||
System Weight | Without power supply: 12.1 lb (5.46 kg) | Without power supply: 12.7 lb (5.78 kg) | |
Power Supply Weight | ● PWR-RGD-AC-DC-H: 2.55 lb (1.16 kg)● PWR-RGD-LOW-DC-H: 2.5 lb (1.13 kg)● PWR-RGD-AC-DC-250: 3.1 lb (1.4 kg) | ||
Power consumption | Maximum of 70W not including PoE consumption |
Switch performance and scalability
Description | Specification |
Forwarding bandwidth | 28 Gbps (line rate/non-blocking) |
Switching bandwidth | 56 Gbps(Switching bandwidth is full-duplex capacity) |
Forwarding rate | 41.67 mpps with 64 byte packets (line rate for all ports and packet sizes) |
Number of queues | 4 egress |
Unicast MAC addresses | 16,000 |
IGMP multicast groups | 1000 |
Number of VLANs | 1000 |
IPv4 MAC security ACEs | 1000 with default TCAM template |
NAT translation | Bidirectional, 128 unique subnet NAT translation entries, which can expand to tens of thousands of translated entries if designed properly |
Cisco IE 4010 LAN base license: Key software features
LAN base license (default) | Features |
Layer 2 switching | IEEE 802.1, 802.3, 802.3at, 802.3af standard, VTPv2, NTP, UDLD, CDP, LLDP, Unicast Mac filter, Flexlink, VTPv3, EtherChannel, Voice VLAN, QinQ tunneling |
Security | SCP, SSH, SNMPv3, TACACS+, RADIUS Server/Client, MAC Address Notification, BPDU Guard, Port-Security, Private VLAN, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard, 802.1x, Guest VLAN, MAC Authentication Bypass, 802.1x Multi-Domain Authentication, Storm Control, Trust Boundary, Cisco TrustSec®security, FIPS 140-2, ACT2, Secure Boot, Full flexible Netflow1 |
Layer 2 multicast | IGMPv1, v2, v3 Snooping, IGMP filtering, IGMP Querier |
Management | Fast Boot, Express Setup, HTTP Web Config, SmartPort, MIB, SNMP, syslog, Storm Control—Unicast, Multicast, Broadcast, SPAN Sessions, RSPAN, DHCP Server, Energywise, PnP, Customized TCAM/SDM size configuration, DOM (digital optical management), Port-based DHCP |
Industrial Ethernet | CIP Ethernet/IP, Profinet v2, IEEE 1588 PTP v2 Default Profile |
Quality of Service (QoS) | Ingress Policing, Rate-Limit, Egress Queueing/shaping, AutoQoS, Modular QoS CLI (MQC),PROFINET QoS |
Layer 2 IPv6 | IPv6 Host support, HTTP over IPv6, SNMP over IPv6 |
Layer 3 routing | IPv4 Static Routing |
Industrial management | Layer 2 switching with 1:1 static Network Address Translation (NAT) |
Utility | IEEE 1588v2 PTP Power Profile 2011 and 2017, dying gasp, GOOSE messaging, SCADA protocol classification, MODBUS TCP/IP Memory Maps, utility SmartPort macro, BFD, Ethernet OAM, IEEE 802.3ah, CFM (IEEE 802.1ag), PTP over Port Channel (TC Mode) |
Redundancy | Redundancy Ethernet Protocol ring (REP), REP Negotiated, REP Segment-ID Auto-DiscoveryParallel Redundancy Protocol (PRP), PTP over PRPHigh Availability Seamless Redundancy (HSR), PTP over HSRMedia Redundancy Protocol (MRP) ring, MRP Auto Manager (MAM) |
1 Full flexible Netflow is included on all IE-4010 Switches and requires either one of the following licenses per switch:
● Cisco ONE™ Foundation Perpetual license
● Cisco DNA Essentials license
● Cisco IP Services license
Cisco IE 4010 IP Services license: Key software features
IP services license | Additional features |
IP multicast | PIM Sparse Mode (PIM-SM), PIM Dense Mode (PIM-DM), and PIM sparse-dense mode |
Industrial management | Embedded Event Manager (EEM) |
IP unicast routing protocols | OSPF, EIGRP, BGPv4, IS-IS, RIPv2, Policy-Based Routing (PBR), HSRP |
IPv6 routing | RIPng, OSPFv6, and EIGRPv6 support |
Security | IEEE 802.1AE MACsec (including PSK based MKA support), Cisco TrustSec®, SGT inline tagging and SGACL, Full flexible Netflow, SGACL Monitor Mode, SGACL Logging, CA Based MKA MACSec Support |
Virtualization | VRF-lite |
Table 10. Cisco IE 4010 Cisco DNA Essentials license features
Feature | Description |
Element Management | Discovery, topology, inventory, software image management |
Basic Assurance | Health Dashboards – Network, ClientBasic Switch and Wired Client Health Monitoring |
Basic | Cisco Network Plug-and-Play application |
Table 11. Cisco IE 4010 Cisco DNA Advantage license features
Feature | Description |
Cisco DNA Essentials | All Cisco DNA Essentials features |
Advanced Automation | Software Defined Access (SDA), IE 4010 can function as an SDA extended nodeREP ring Workflow |
Assurance and Analytics | Compliance, Custom Reports, Device 360 and Wired Client 360 |
Table 12. Compliance specifications
Type | Standards |
Electromagnetic emissions | FCC 47 CFR Part 15 Class A EN 55032 Class AVCCI Class AAS/NZS CISPR 22 Class ACISPR 11 Class ACISPR 32 Class AICES 003 Class AEN 300 386CNS 13438 Class A |
Electromagnetic immunity | EN55024 CISPR 24AS/NZS CISPR 24EN 61000-4-2 Electro Static Discharge EN 61000-4-3 Radiated RFEN 61000-4-4 Electromagnetic Fast Transients EN 61000-4-5 SurgeEN 61000-4-6 Conducted RFEN 61000-4-8 Power Frequency Magnetic Field EN 61000-4-9 Pulse Magnetic FieldEN 61000-4-11 AC Power VoltageEN 61000-4-18 Damped Oscillatory WaveEN-61000-4-29 DC Voltage Dips |
Industry standards | EN 61000-6-1 Light IndustrialEN 61000-6-2 IndustrialEN 61000-6-4 IndustrialEN 61326 Industrial ControlEN 61131-2 Programmable ControllersIEEE 1613 Electric Power Stations Communications NetworkingIEC 61850-3 Communication networks for power utility automationEN 50121-4 Railway – Signaling and Telecommunications ApparatusEN 50121-3-2 Railway – Apparatus for Rolling StockPROFINET conformance BIP30NEMA TS-2 (EMC, environmental, mechanical) |
Safety standards and certifications | Information technology equipment:UL/CSA 60950-1UL/CSA 62368-1IEC 62368-1 CB with all country deviationsEN 60950-1IEC 60950-1 CB with all country deviationsNOM to NOM-019-SCFI (through partners and distributor)Industrial floor (control equipment):UL 508UL 61010-2CSA C22.2, No 142Hazardous locations:Class 1, Div2, gas groups IIC ANSI/ISA 12.12.01 CSA C22.2 No 213IEC 60079-0, -15 IECEx test reportEN 60079-0, -15 ATEX certification (Class I Zone 2) (Cabinet enclosure required) |
Operating environment | Operating Temperature: -40C to +75C● -40C to +70C (Vented Enclosure – 40 LFM Air Flow)● -40C to +60C (Sealed Enclosure – 0 LFM Air Flow)● -34C to +75C (Fan or Blower equipped Enclosure – 200 LFM Air Flow)● -40C to +85C (IEC 60068-2-2 Environmental Type Testing, 16 hours)● Operating altitude: Up to 13,800ft● EN 60068-2-1, EN 61163 |
Storage environment | Temperature: -40C to +85CAltitude: Up to 15,000 feetIEC 60068-2-14 |
Humidity | Relative humidity of 5% to 95% noncondensingIEC 60068-2-3IEC 60068-2-30 |
Shock and vibration | IEC 60068-2-27 (operational shock, 50G, 11ms, Half Sine)IEC 60068-2-27 (Non-Operational Shock, 65-80G, 9ms, Trapezoidal)IEC 60068-2-6, IEC 60068-2-64, EN 61373 (Operational Vibration)IEC 60068-2-6, IEC 60068-2-64, EN 61373 (Nonoperational Vibration) |
Corrosion | ISO 9223: Corrosionclass C3-Mediumclass C4-HighIEC 60068-2-52 (Salt Mist)IEC 60068-2-60 (Flowing Mixed Gas) |
Others | RoHS ComplianceChina RoHS ComplianceTAA (Government)CE (Europe) |
Warranty | Five-year limited hardware warranty on all IE-4010 PIDs and power supplies (see Table 3). See link that follows for more details on warranty. |
Mean Time Between Failures (MTBF) | IE-4010-4S24P: 429,620 hoursIE-4010-16S12P: 415,160 hours |
联系在线客服 139 1073 6192
loading…
已经是到最后一篇内容了!
Product ID | Description |
Cisco IE 4010 Hardware PIDs | |
IE-4010-16S12P | IE4010 with 12GE SFP, 12GE Copper PoE+ and 4GE SFP uplink ports |
IE-4010-4S24P | IE4010 with 24GE Copper PoE+ ports and 4GE SFP uplink ports |
Cisco IE 4010 software licenses and accessories PIDs | |
IE-LICENSE-SPARE | Spare license for software upgrade (L2 to L3 features) |
L-IE4000-RTU= | IE4010 Electronic software license upgrade from LAN base L2 to IP Services L3 features |
LIC-MRP-Manager= | MRP ring manager license |
LIC-MRP-Client= | MRP ring client license |
SD-IE-1GB= | IE 1GB SD Memory Card – Spare |
Cisco ONE™Licenses | |
C1F1PIE4K5K1K9 | Cisco ONE Foundation Lite PerpetualIncludes Prime Infrastructure (LF and AS), Identity Services Engine – Base |
C1F1PIE40001K9 | Cisco ONE Foundation PerpetualIncludes Full flexible Netflow, Stealthwatch, Prime Infrastructure, and Identity Services Engineer – Base |
C1A1PIE40001K9 | Cisco ONE Advanced PerpetualIncludes IP Services |
C1-FLOW-IE4K | Cisco ONE Netflow IE4000 |
C1A1AIE40001K9 | Cisco ONE Advanced Perpetual – IE 4000 |
C1F1AIE40001K9 | Cisco ONE Foundation Perpetual – IE 4000, BROWNFIELD |
C1F1AIE4K5K1K9 | Cisco ONE Foundation Lite Perpetual – IE 4000/5000 |
C1F1PIE40001K9 | Cisco ONE Foundation Perpetual – IE 4000 |
Cisco IE 4010 Cisco DNA licenses | |
IE4010-DNA-E-H | Cisco DNA Essentials license |
IE4010-DNA-E-H-3Y | Cisco DNA Essentials 3-year term license option |
IE4010-DNA-E-H-5Y | Cisco DNA Essentials 5-year term license option |
IE4010-DNA-E-H-7Y | Cisco DNA Essentials 7-year term license option |
IE4010-DNA-A-H | Cisco DNA Advantage license |
IE4010-DNA-A-H-3Y | Cisco DNA Advantage 3-year term license option |
IE4010-DNA-A-H-5Y | Cisco DNA Advantage 5-year term license option |
IE4010-DNA-A-H-7Y | Cisco DNA Advantage 7-year term license option |
SFP support
Part number | Specification | SFP type | Max distance | Cable type | Temp range* | DOM support |
GLC-FE-100FX-RGD= | 100BASE-FX | FE | 2 km | MMF | IND | Yes |
GLC-FE-100LX-RGD= | 100BASE-LX10 | FE | 10 km | SMF | IND | Yes |
GLC-FE-100FX= | 100BASE-FX | FE | 2 km | MMF | COM | No |
GLC-FE-100LX= | 100BASE-LX10 | FE | 10 km | SMF | COM | No |
GLC-FE-100EX= | 100BASE-EX | FE | 40 km | SMF | COM | No |
GLC-FE-100ZX= | 100BASE-ZX | FE | 80 km | SMF | COM | No |
GLC-FE-100BX-D= | 100BASE-BX10 | FE | 10 km | SMF | COM | No |
GLC-FE-100BX-U= | 100BASE-BX10 | FE | 10 km | SMF | COM | Yes |
GLC-SX-MM-RGD= | 1000BASE-SX | GE | 550 m | MMF | IND | Yes |
GLC-LX-SM-RGD= | 1000BASE-LX/LH | GE | 550 m/10 km | MMF/SMF | IND | Yes |
GLC-ZX-SM-RGD= | 1000BASE-ZX | GE | 70 km | SMF | IND | Yes |
GLC-BX-U-I= | 1000BASE-BX | GE | 10 km | SMF | IND | Yes |
GLC-BX-D-I= | 1000BASE-BX | GE | 10 km | SMF | IND | Yes |
GLC-BX40-U-I= | 1000BASE-BX40 | GE | 40 km | SMF | IND | Yes |
GLC-BX40-D-I= | 1000BASE-BX40 | GE | 40 km | SMF | IND | Yes |
GLC-BX40-DA-I= | 1000BASE-BX40 | GE | 40km | SMF | IND | Yes |
GLC-BX80-U-I= | 1000BASE-BX80 | GE | 80km | SMF | IND | Yes |
GLC-BX80-D-I= | 1000BASE-BX80 | GE | 80km | SMF | IND | Yes |
GLC-SX-MMD= | 1000BASE-SX | GE | 550m | MMF | EXT | Yes |
GLC-LH-SMD= | 1000BASE-LX/LH | GE | 550m/10km | MMF/SMF | EXT | Yes |
GLC-EX-SMD= | 1000BASE-EX | GE | 40 km | SMF | EXT | Yes |
GLC-ZX-SMD= | 1000BASE-ZX | GE | 70 km | SMF | EXT | Yes |
GLC-BX-D= | 1000BASE-BX10 | GE | 10 km | SMF | COM | Yes |
GLC-BX-U= | 1000BASE-BX10 | GE | 10 km | SMF | COM | Yes |
CWDM-SFP-xxxx= (8 freq) | CWDM 1000BASE-X | GE | SMF | COM | Yes | |
DWDM-SFP-xxxx= (40 freq) | DWDM 1000BASE-X | GE | SMF | COM | Yes | |
SFP-GE-S= | 1000BASE-SX | GE | 550 m | MMF | EXT | Yes |
SFP-GE-L= | 1000BASE-LX/LH | GE | 550 m/10 km | MMF/SMF | EXT | Yes |
SFP-GE-Z= | 1000BASE-ZX | GE | 70 km | SMF | EXT | Yes |
GLC-SX-MM= | 1000BASE-SX | GE | 550 m | MMF | COM | No |
GLC-LH-SM= | 1000BASE-LX/LH | GE | 550 m/10 km | MMF/SMF | COM | No |
GLC-ZX-SM= | 1000BASE-ZX | GE | 70 km | SMF | COM | Yes |
GLC-TE= | 1000BASE-T | GE | 100 m | Copper | EXT | NA |
GLC-T= | 1000BASE-T | GE | 100 m | Copper | COM | NA |
GLC-T-RGD= | 1000BASE-T | GE | 100 m | Copper | IND | NA |
Note:
Not all SFPs are supported in all software versions. For the first software release supporting SFP, visit https://www.cisco.com/en/US/products/hw/modules/ps5455/products_device_support_tables_list.html.
Not all SFPs are supported in PROFINET GSD, SIMATIC STEP7/TIA Portal, please visit https://www.cisco.com/c/en/us/td/docs/switches/lan/industrial/software/configuration/guide/b_sfp_TIA.html
*If nonindustrial (that is, EXT, COM) SFPs are used, the switch operating temperature must be derated.
MMF = multimode fiber SMF = single-mode fiber
欢迎访问交换机商城,如有疑问,可随时致电139-1073-6192
这是一个用于测试的演示商店—将不会履行订单约定。 忽略